Management Security Commands - D-Link DWS-4000 Series Cli Command Reference

sshcon timeout
This command sets the SSH connection session timeout value, in minutes. A session is active as long as the session has
been idle for the value set. The time is a decimal value from 1 to 160.
Changing the timeout value for active sessions does not become effective until the session is re accessed. Also, any
keystroke activates the new timeout duration.
Default 5
Format
sshcon timeout <1-160>
Mode Privileged EXEC
no sshcon timeout
This command sets the SSH connection session timeout value, in minutes, to the default.
Changing the timeout value for active sessions does not become effective until the session is re accessed. Also, any
keystroke activates the new timeout duration.
Format
no sshcon timeout
Mode Privileged EXEC
show ip ssh
This command displays the ssh settings.
Format
show ip ssh
Mode Privileged EXEC
Term Definition
Administrative This field indicates whether the administrative mode of SSH is enabled or disabled.
Mode
Protocol Level The protocol level may have the values of version 1, version 2 or both versions 1 and version 2.
SSH Sessions The number of SSH sessions currently active.
Currently Active
Max SSH Sessions The maximum number of SSH sessions allowed.
Allowed
SSH Timeout The SSH timeout value in minutes.
Keys Present Indicates whether the SSH RSA and DSA key files are present on the device.
Key Generation in Indicates whether RSA or DSA key files generation is currently in progress.
Progress
M S
ANAGEMENT
This section describes commands you use to generate keys and certificates, which you can do in addition to loading them
as before.
C
ECURITY OMMANDS

Management Security Commands

483