D-Link DWS-4000 Series Cli Command Reference page 334

D-Link Unified Switch CLI Command Reference
Default Enable
Format
wids-security unmanaged-ap-wired
Mode Wireless Config
no wids-security unmanaged-ap-wired
Use this command to disable the mode to report unmanaged APs on a wired network.
Format
no wids-security unmanaged-ap-wired
Mode Wireless Config
wids-security wds-device-unexpected
(Unexpected WDS device is detected on the network Rogue Detection.) Use this command to enable rogue reporting for
detection of unexpected WDS devices.
Default Enable
Format
wids-security wds-device-unexpected
Mode Wireless Config
no wids-security wds-device-unexpected
Use this command to disable the mode to report detection of unexpected WDS devices.
Format
no wids-security wds-device-unexpected
Mode Wireless Config
wids-security wired-detection-interval
(Minimum wired detection interval.) Use this command to set the minimum number of seconds that the AP waits before
starting a new wired network detection cycle.
Default 60
Format
wids-security wired-detection-interval <interval>
Mode Wireless Config
Parameter Description
interval Minimum number of seconds that the AP waits before starting a new wired network detection cycle.
The range is 1-3600 seconds. A value of zero (0) disables wired detection.
no wids-security wired-detection-interval
This command restores the minimum wired detection interval to its default value.
© 2009 D-Link Corporation. All Rights Reserved
326