D-Link DWS-4000 Series Cli Command Reference page 106

D-Link Unified Switch CLI Command Reference
no macfilter addsrc all
This command removes all interfaces to the source filter set for the MAC filter with the MAC address of <macaddr> and
VLAN of <vlanid>. You must specify the <macaddr> parameter as a 6-byte hexadecimal number in the format of
b1:b2:b3:b4:b5:b6.
The <vlanid> parameter must identify a valid VLAN.
Format
no macfilter addsrc all <macaddr> <vlanid>
Mode Global Config
show mac-address-table static
This command displays the Static MAC Filtering information for all Static MAC Filters. If you select <all>, all the Static MAC
Filters in the system are displayed. If you supply a value for <macaddr>, you must also enter a value for <vlanid>, and
the system displays Static MAC Filter information only for that MAC address and VLAN.
Format
show mac-address-table static {<macaddr> <vlanid> | all}
Mode Privileged EXEC
Term Definition
MAC Address The MAC Address of the static MAC filter entry.
VLAN ID The VLAN ID of the static MAC filter entry.
Source Port(s) The source port filter set's slot and port(s).
Note: Only multicast address filters will have destination port lists.
show mac-address-table staticfiltering
This command displays the Static Filtering entries in the Multicast Forwarding Database (MFDB) table.
Format
show mac-address-table staticfiltering
Mode Privileged EXEC
Term Definition
Mac Address A unicast MAC address for which the switch has forwarding and or filtering information. As the data is
gleaned from the MFDB, the address will be a multicast address. The format is 6 or 8 two-digit
hexadecimal numbers that are separated by colons, for example 01:23:45:67:89:AB. In an IVL system
the MAC address will be displayed as 8 bytes.
Type The type of the entry. Static entries are those that are configured by the end user. Dynamic entries are
added to the table as a result of a learning process or protocol.
Description The text description of this multicast table entry.
Interfaces The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).
© 2009 D-Link Corporation. All Rights Reserved
98