lacp partner port priority
Use this command to configure the LACP partner port priority. The valid range for <priority> is 0 to 255.
Default
0x0
Format
lacp partner port priority <priority>
Mode
Interface Config
Note: This command is only applicable to physical interfaces.
no lacp partner port priority
Use this command to configure the default LACP partner port priority.
Format
no lacp partner port priority
Mode
Interface Config
lacp partner system-id
Use this command to configure the 6-octet MAC Address value representing the administrative value of the Aggregation
Port's protocol Partner's System ID. The valid range of <system-id> is 00:00:00:00:00:00 - FF:FF:FF:FF:FF.
Default
00:00:00:00:00:00
Format
lacp partner system-id <system-id>
Mode
Interface Config
Note: This command is only applicable to physical interfaces.
no lacp partner system-id
Use this command to configure the default value representing the administrative value of the Aggregation Port's protocol
Partner's System ID.
Format
no lacp partner system-id
Mode
Interface Config
lacp partner system priority
Use this command to configure the administrative value of the priority associated with the Partner's System ID. The valid
range for <priority> is 0 to 255.
Default
0x0
Format
lacp partner system priority <priority>
Mode
Interface Config
Port-Channel/LAG (802.3ad) Commands
87