D-Link DWS-4000 Series Cli Command Reference page 262

D-Link Unified Switch CLI Command Reference
Default tkip
Format
wpa ciphers {ccmp [tkip] | tkip}
Mode Network Config
Parameter Description
tkip TKIP encryption.
ccmp CCMP encryption.
no wpa ciphers
The no version of this command WPA returns supported cipher suites to the default value.
Format
no wpa ciphers
Mode Network Config
wpa key
This command configures the WPA shared key. This is an alphanumeric string in the range 8-64 characters. The configured
key is used when the network security mode is set to WPA shared key.
Default None
Format
wpa key <value>
Mode Network Config
tunnel
This command enables client traffic tunneling on the network. For the tunnel to be operational, global routing must be
enabled on the switch and the tunnel subnet, and mask must be configured and match a valid routing interface.
Default Disable
Format
tunnel
Mode Network Config
no tunnel
The no version of this command disables client traffic tunneling on the network.
Format
no tunnel
Mode Network Config
tunnel subnet
This command configures the tunnel subnet IP address for the network. This must match a configured routing interface in
order for the tunnel to be operational.
© 2009 D-Link Corporation. All Rights Reserved
254