Table of Contents
Advertisement
Interface RemID
-------
-------
0/1
0/2
0/3
0/4
0/5
0/6
0/7
2
0/7
3
0/7
4
0/7
5
0/7
1
0/7
6
0/8
0/9
0/10
0/11
0/12
--More-- or (q)uit
show lldp remote-device detail
Use this command to display detailed information about remote devices that transmit current LLDP data to an interface on
the system.
Format
show lldp remote-device detail <slot/port>
Mode
Privileged EXEC
Term
Definition
Local Interface
The interface that received the LLDPDU from the remote device.
Remote Identifier
An internal identifier to the switch to mark each remote device to the system.
Chassis ID
The type of identification used in the Chassis ID field.
Subtype
Chassis ID
The chassis of the remote device.
Port ID Subtype
The type of port on the remote device.
Port ID
The port number that transmitted the LLDPDU.
System Name
The system name of the remote device.
System
Describes the remote system by identifying the system name and versions of hardware, operating
Description
system, and networking software supported in the device.
Port Description
Describes the port in an alpha-numeric format. The port description is configurable.
System
Indicates the primary function(s) of the device.
Capabilities
Supported
System
Shows which of the supported system capabilities are enabled.
Capabilities
Enabled
Management
For each interface on the remote device with an LLDP agent, lists the type of address the remote LLDP
Address
agent uses and specifies the address used to obtain information related to the device.
Chassis ID
--------------------
00:FC:E3:90:01:0F
00:FC:E3:90:01:0F
00:FC:E3:90:01:0F
00:FC:E3:90:01:0F
00:FC:E3:90:01:0F
00:FC:E3:90:01:0F
Port ID
------------------
00:FC:E3:90:01:11
00:FC:E3:90:01:12
00:FC:E3:90:01:13
00:FC:E3:90:01:14
00:FC:E3:90:03:11
00:FC:E3:90:04:11
LLDP (802.1AB) Commands
System Name
------------------
137
Advertisement
Table of Contents
