D-Link DWS-4000 Series Cli Command Reference page 261

<cr>Press Enter to execute the command.
(DWS-4026) # no radius use-network-configuration ?
<cr>Press Enter to execute the command.
radius accounting (Network Config)
This command enables RADIUS accounting mode for authentication on this network.
Default Disable
Format
radius accounting
Mode Network Config
no radius accounting
The no version of this command disables RADIUS accounting mode for authentication on this network.
Format
no radius accounting
Mode Network Config
wpa versions
This command configures the WPA version(s) supported on the network. One or both parameters must be specified. This
configuration only applies when the configured security mode is WPA.
Default wpa/wpa2
Format
wpa versions {wpa [wpa2] | wpa2}
Mode Network Config
Parameter Description
wpa WPA version allowed.
wpa2 WPA2 version allowed.
no wpa versions
The no version of this command configures the supported WPA versions to the default value.
Format
no wpa versions
Mode Network Config
wpa ciphers
This command configures the WPA cipher suites supported on the network; one or both parameters must be specified. This
configuration only applies when the configured security mode is WPA.
Wireless Network Commands
253