D-Link DWS-4000 Series Cli Command Reference page 256

D-Link Unified Switch CLI Command Reference
Default None (The default is "blank".)
Format
redirect url <url>
Mode Network Config
Parameter Description
url A Uniform Resource Locator, for example www.cnn.com. The URL must be 0-128 characters.
no redirect url
The no version of this command removes the configured URL. The value is set to an empty string.
Format
no redirect url
Mode Network Config
security mode
This command configures the authentication and encryption mode on the network.
Default none
Format
security mode {none | static-wep | wep-dot1x | wpa-enterprise | wpa-personal}
Mode Network Config
Parameter Description
none No authentication or encryption on the network.
static-wep Static WEP encryption, authentication is configured separately.
wep-dot1x Dynamic WEP authentication using 802.1x.
wpa-enterprise WPA 802.1x authentication .
wpa-personal WPA shared-key authentication.
no security mode
The no version of this command sets the security mode to its default value.
Format
no security mode
Mode Network Config
wep authentication
This command configures the static WEP authentication mode for the network. This value is applicable only when the
security mode is configured for static WEP authentication and encryption.
© 2009 D-Link Corporation. All Rights Reserved
248