D-Link DWS-4000 Series Cli Command Reference page 144

Hide thumbs Also See for DWS-4000 Series:
Table of Contents

Advertisement

D-Link Unified Switch CLI Command Reference
Term
Definition
Last Update
The amount of time since the last update to the remote table in days, hours, minutes, and seconds.
Total Inserts
Total number of inserts to the remote data table.
Total Deletes
Total number of deletes from the remote data table.
Total Drops
Total number of times the complete remote data received was not inserted due to insufficient
resources.
Total Ageouts
Total number of times a complete remote data entry was deleted because the Time to Live interval
expired.
The table contains the following column headings:
Term
Definition
Interface
The interface in slot/port format.
Transmit Total
Total number of LLDP packets transmitted on the port.
Receive Total
Total number of LLDP packets received on the port.
Discards
Total number of LLDP frames discarded on the port for any reason.
Errors
The number of invalid LLDP frames received on the port.
Ageouts
Total number of times a complete remote data entry was deleted for the port because the Time to Live
interval expired.
TVL Discards
The number of TLVs discarded.
TVL Unknowns
Total number of LLDP TLVs received on the port where the type value is in the reserved range, and
not recognized.
show lldp remote-device
Use this command to display summary information about remote devices that transmit current LLDP data to the system. You
can show information about LLDP remote data received on all ports or on a specific port.
Format
show lldp remote-device {<slot/port> | all}
Mode
Privileged EXEC
Term
Definition
Local Interface
The interface that received the LLDPDU from the remote device.
RemID
An internal identifier to the switch to mark each remote device to the system.
Chassis ID
The ID that is sent by a remote device as part of the LLDP message, it is usually a MAC address of
the device.
Port ID
The port number that transmitted the LLDPDU.
System Name
The system name of the remote device.
Example: The following shows example CLI display output for the command.
(DWS-4026) #show lldp remote-device all
LLDP Remote Device Summary
Local
© 2009 D-Link Corporation. All Rights Reserved
136

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dwl-8600ap

Table of Contents