D-Link DWS-4000 Series Cli Command Reference page 100

D-Link Unified Switch CLI Command Reference
no port-channel system priority
Use this command to configure the default port-channel system priority value.
Format
no port-channel system priority
Mode Global Config
show lacp actor
Use this command to display LACP actor attributes.
Format
show lacp actor {<slot/port>|all}
Mode Global Config
The following output parameters are displayed.
Parameter Description
System Priority The administrative value of the Key.
Actor Admin Key The administrative value of the Key.
Port Priority The priority value assigned to the Aggregation Port.
Admin State The administrative values of the actor state as transmitted by the Actor in LACPDUs.
show lacp partner
Use this command to display LACP partner attributes.
Format
show lacp actor {<slot/port>|all}
Mode Privileged EXEC
The following output parameters are displayed.
Parameter Description
System Priority The administrative value of priority associated with the Partner's System ID.
System-ID The value representing the administrative value of the Aggregation Port's protocol Partner's System
ID.
Admin Key The administrative value of the Key for the protocol Partner.
Port Priority The administrative value of the Key for protocol Partner.
Port-ID The administrative value of the port number for the protocol Partner.
Admin State The administrative values of the actor state for the protocol Partner.
© 2009 D-Link Corporation. All Rights Reserved
92