Switching; Table 28: User_Manager Log Messages; Table 29: Protected Ports Log Messages - D-Link DWS-4000 Series Cli Command Reference

Component Message
SSLT SSLT: Msg Queue is full, event = XXXX
SSLT SSLT: Unknown UI event in message,
event = XXXX
SSLT ssltApiCnfgrCommand: Failed calling
ssltIssueCmd.
SSLT SSLT: Error loading certificate from file XXXX
SSLT SSLT: Error loading private key from file
SSLT SSLT: Error setting cipher list (no valid ciphers)
SSLT SSLT: Could not delete the SSL semaphores
Component Message
User_Manager User Login Failed for XXXX
User_Manager Access level for user XXXX could not be
determined. Setting to READ_ONLY.
User_Manager Could not migrate config file XXXX from version
YYYY to ZZZZ. Using defaults.
S
WITCHING
Component Message
Protected Ports Protected Port: failed to save configuration
Protected Ports protectedPortCnfgrInitPhase1Process: Unable to
create r/w lock for protectedPort
Protected Ports protectedPortCnfgrInitPhase2Process: Unable to
register for VLAN change callback
Protected Ports Cannot add intIfNum xxx to group yyy
Table 27: SSLT Log Messages

Table 28: User_Manager Log Messages

Table 29: Protected Ports Log Messages

Cause
Failed to send the received message to the SSLT
message queue as message queue is full. XXXX
indicates the event to be sent.
Failed to dispatch the received UI event to the
appropriate SSLT function as it's an invalid event.
XXXX indicates the event to be dispatched.
Failed to send the message to the SSLT message
queue.
Failed while loading the SSLcertificate from
specified file. XXXX indicates the file from where
the certificate is being read.
Failed while loading private key for SSL
connection.
Failed while setting cipher list.
Failed to delete SSL semaphores during
cleanup.of all resources associated with the
OpenSSL Locking semaphores.
Cause
Failed to authenticate user login. XXXX indicates
the username to be authenticated.
Invalid access level specified for the user. The
access level is set to READ_ONLY. XXXX
indicates the username.
Failed to migrate the config file. XXXX is the config
file name. YYYY is the old version number and
ZZZZ is the new version number.
Cause
This appears when the protected port configuration
cannot be saved.
This appears when protectedPortCfgRWLock
Fails.
This appears when nimRegisterIntfChange with
VLAN fails.
This appears when an interface could not be
added to a particular group.

Switching

527