D-Link DWS-4000 Series Cli Command Reference page 199

no enable (RIP)
This command sets the administrative mode of RIP in the router to inactive.
Format
no enable
Mode Router RIP Config
ip rip
This command enables RIP on a router interface.
Default disabled
Format
ip rip
Mode Interface Config
no ip rip
This command disables RIP on a router interface.
Format
no ip rip
Mode Interface Config
auto-summary
This command enables the RIP auto-summarization mode.
Default disabled
Format
auto-summary
Mode Router RIP Config
no auto-summary
This command disables the RIP auto-summarization mode.
Format
no auto-summary
Mode Router RIP Config
default-information originate (RIP)
This command is used to control the advertisement of default routes.
Format
default-information originate
Mode Router RIP Config
Routing Information Protocol Commands
191