D-Link DWS-4000 Series Cli Command Reference page 342

D-Link Unified Switch CLI Command Reference
no wids-security client threat-mitigation
Use this command to disable the test for Client Threat Mitigation.
Format
no wids-security client threat-mitigation
Mode Wireless Config
wids-security client threshold-value-deauth
Use this command to configure the maximum number of de-authentication messages which a switch can receive during the
threshold interval.
Default 10
Format
wids-security client threshold-value-deauth <1-99999>
Mode Wireless Config
Parameter Description
1-99999 Range of the threshold value.
no wids-security client threshold-value-deauth
Use this command to set the threshold-value for de-authentication messages to the default.
Format
no wids-security client threshold-value-deauth
Mode Wireless Config
wids-security client threshold-interval-deauth
Use this command to configure the threshold interval for counting the de-authentication messages.
Default 60
Format
wids-security client threshold-interval-deauth <1-3600>
Mode Wireless Config
Parameter Description
1-3600 Range of the threshold value.
no wids-security client threshold-interval-deauth
Use this command to set the threshold value for the de-authentication interval to its default.
Format
no wids-security client threshold-interval-deauth
Mode Wireless Config
© 2009 D-Link Corporation. All Rights Reserved
334