Table of Contents
Advertisement
D-Link Unified Switch CLI Command Reference
show ip rip interface brief
This command displays general information for each RIP interface. For this command to display successful results routing
must be enabled per interface (i.e., ip rip).
Format
show ip rip interface brief
Modes
• Privileged EXEC
• User EXEC
Term
Definition
Interface
Valid slot and port number separated by a forward slash.
IP Address
The IP source address used by the specified RIP interface.
Send Version
The RIP version(s) used when sending updates on the specified interface. The types are none, RIP-
1, RIP-1c, RIP-2
Receive Version
The RIP version(s) allowed when receiving updates from the specified interface. The types are none,
RIP-1, RIP-2, Both
RIP Mode
The administrative mode of router RIP operation (enabled or disabled).
Link State
The mode of the interface (up or down).
show ip rip interface
This command displays information related to a particular RIP interface.
Format
show ip rip interface <slot/port>
Modes
• Privileged EXEC
• User EXEC
Term
Definition
Interface
Valid slot and port number separated by a forward slash. This is a configured value.
IP Address
The IP source address used by the specified RIP interface. This is a configured value.
Send Version
The RIP version(s) used when sending updates on the specified interface. The types are none, RIP-
1, RIP-1c, RIP-2. This is a configured value.
Receive Version
The RIP version(s) allowed when receiving updates from the specified interface. The types are none,
RIP-1, RIP-2, Both. This is a configured value.
Both RIP Admin
RIP administrative mode of router RIP operation; enable activates, disable de-activates it. This is a
Mode
configured value.
Link State
Indicates whether the RIP interface is up or down. This is a configured value.
Authentication
The RIP Authentication Type for the specified interface. The types are none, simple, and encrypt. This
Type
is a configured value.
Default Metric
A number which represents the metric used for default routes in RIP updates originated on the
specified interface. This is a configured value.
The following information will be invalid if the link state is down.
© 2009 D-Link Corporation. All Rights Reserved
196
Advertisement
Table of Contents
