D-Link DWS-4000 Series Cli Command Reference page 80

D-Link Unified Switch CLI Command Reference
storm-control broadcast all
This command enables broadcast storm recovery mode for all interfaces. If the mode is enabled, broadcast storm recovery
is active, and if the rate of L2 broadcast traffic ingressing on an interface increases beyond the configured threshold, the
traffic will be dropped. Therefore, the rate of broadcast traffic will be limited to the configured threshold.
Default disabled
Format
storm-control broadcast all
Mode Global Config
no storm-control broadcast all
This command disables broadcast storm recovery mode for all interfaces.
Format
no storm-control broadcast all
Mode Global Config
storm-control broadcast all level
This command configures the broadcast storm recovery threshold for all interfaces as a percentage of link speed and
enables broadcast storm recovery. If the mode is enabled, broadcast storm recovery is active, and if the rate of L2 broadcast
traffic ingressing on an interface increases beyond the configured threshold, the traffic will be dropped. Therefore, the rate
of broadcast traffic will be limited to the configured threshold.This command also enables broadcast storm recovery mode
for all interfaces.
Default 5
Format
storm-control broadcast all level <0-100>
Mode Global Config
no storm-control broadcast all level
This command sets the broadcast storm recovery threshold to the default value for all interfaces and disables broadcast
storm recovery.
Format
no storm-control broadcast all level
Mode Global Config
storm-control broadcast all rate
Use this command to configure the broadcast storm recovery threshold for all interfaces in packets per second. If the mode
is enabled, broadcast storm recovery is active, and if the rate of L2 broadcast traffic ingressing on an interface increases
beyond the configured threshold, the traffic is dropped. Therefore, the rate of broadcast traffic is limited to the configured
threshold.
Default 0
Format
storm-control broadcast rate <0-33554431>
Mode Global Config
© 2009 D-Link Corporation. All Rights Reserved
72