D-Link Unified Switch CLI Command Reference
no port lacptimeout
This command sets the timeout for all physical interfaces of a particular device type (actor or partner) back to their default
values.
Format
no port lacptimeout {actor | partner}
Mode
Global Config
port-channel adminmode
This command enables a port-channel (LAG). The option all sets every configured port-channel with the same
administrative mode setting.
Format
port-channel adminmode [all]
Mode
Global Config
no port-channel adminmode
This command disables a port-channel (LAG). The option all sets every configured port-channel with the same
administrative mode setting.
Format
no port-channel adminmode [all]
Mode
Global Config
port-channel linktrap
This command enables link trap notifications for the port-channel (LAG). The interface is a logical slot/port for a configured
port-channel. The option all sets every configured port-channel with the same administrative mode setting.
Default
enabled
Format
port-channel linktrap {<logical slot/port> | all}
Mode
Global Config
no port-channel linktrap
This command disables link trap notifications for the port-channel (LAG). The interface is a logical slot and port for a
configured port-channel. The option all sets every configured port-channel with the same administrative mode setting.
Format
no port-channel linktrap {<logical slot/port> | all}
Mode
Global Config
port-channel load-balance
This command selects the load-balancing option used on a port-channel (LAG). Traffic is balanced on a port-channel (LAG)
by selecting one of the links in the channel over which to transmit specific packets. The link is selected by creating a binary
pattern from selected fields in a packet, and associating that pattern with a particular link.
© 2009 D-Link Corporation. All Rights Reserved
90