D-Link DWS-4000 Series Cli Command Reference page 229

Format
show wireless configuration request status
Mode Privileged EXEC
Field Description
Status The global status for the configuration push request.
Total Count The total number of peer switches configuration being pushed in the current configuration push
request. This may be to one peer switch or to the total number of peer switches at the time the
configuration push request is started.
Success Count Indicates the total number of peer switches to which the configuration has been pushed successfully
for the current configuration push request.
Failure Count Indicates the total number of peer switches to which the configuration push request failed for the
current configuration push request.
IP Address The peer switch IP Address.
Configuration Configuration push status for the peer switch.
Status
Example: The following shows example CLI display output for the command.
(DWS-4026) #show wireless configuration request status
Global Status:
Configuration Status................... Sending Configuration
Total Count
Success Count ........................ 0
Failure Count ......................... 1
Peer-Switch Status:
IP Address
---------------
10.0.0.100
10.0.0.101
10.0.0.102
show wireless configuration receive status
This show command displays the peer switch configuration received status.
Format
show wireless configuration receive status
Mode Privileged EXEC
Field Description
Switch IP The peer switch IP address that pushed configuration.
Configuration Indicates the configuration groups received as part of the configuration push.
Received
Receive Time Indicates the configuration push received time.
Receive Status Indicates the status of the configuration push receive from the peer switch.
................... 3
Configuration Status
--------------------
Failure Invalid Code Version
In Progress
Requested
Unified Switch Commands
221