D-Link DWS-4000 Series Cli Command Reference page 516

D-Link Unified Switch CLI Command Reference
radius server retransmit
This command configures the global parameter for the RADIUS client that specifies the number of transmissions of the
messages to be made before attempting the fall back server upon unsuccessful communication with the current RADIUS
authenticating server. When the maximum number of retries are exhausted for the RADIUS accounting server and no
response is received, the client does not communicate with any other server.
Default 4
Format
radius server retransmit <retries>
Mode Global Config
Field Description
retries The maximum number of transmission attempts in the range of 1 to 15.
no radius server retransmit
The no version of this command sets the value of this global parameter to the default value.
Format
no radius server retransmit
Mode Global Config
radius server timeout
This command configures the global parameter for the RADIUS client that specifies the timeout value (in seconds) after
which a request must be retransmitted to the RADIUS server if no response is received. The timeout value is an integer in
the range of 1 to 30.
Default 5
Format
radius server timeout <seconds>
Mode Global Config
Field Description
retries Maximum number of transmission attempts in the range <1-30>.
no radius server timeout
The no version of this command sets the timeout global parameter to the default value.
Format
no radius server timeout
Mode Global Config
show radius
This command displays the values configured for the global parameters of the RADIUS client.
© 2009 D-Link Corporation. All Rights Reserved
508