Table of Contents
Advertisement
Field
Description
Power Plan Mode
The mode for automatic power adjustment, manual or interval. If the mode is manual, the power
algorithm will not run unless you request it.
Power Plan Interval If the power adjustment mode is interval, this indicates the frequency in minutes that power
adjustments are computed and applied.
show wireless power-plan proposed
This command displays the proposed power adjustments for a manual request to run the power algorithm. The command
does not accept any arguments. The proposed power changes may be cleared or applied using the wireless power-plan
command. If the IP address is not entered, the command displays a proposed summary for all peer switches. If a peer switch
IP address is entered, detailed proposed entries for that peer switch are displayed.
Format
show wireless power-plan proposed [<ipaddr>]
Mode
Privileged EXEC
Field
Description
ipaddr
The <ip addr> is a valid IP address.
Current Status
Indicates the status of a manual power adjustment request.
AP MAC Address
The managed AP Ethernet MAC address.
Location
A descriptive location string configured for the managed AP.
Radio
The radio interface on the managed AP.
Current Power
The current transmit power on the managed AP radio.
New Power
The new transmit power computed by the power algorithm.
Example: The following shows example CLI display output for the command.
(DWS-4026) #show wireless power-plan proposed
Switch IP Address
-----------------
10.0.0.1
10.254.22.1
10.254.22.15
(DWS-4026) #show wireless power-plan proposed 10.254.22.15
Current Status................................. Algorithm Complete
No proposed power adjustments to display.
Current Status
---------------
Algorithm Completed
Algorithm Completed
Algorithm Completed
Unified Switch Channel and Power Commands
233
Advertisement
Table of Contents
