D-Link DWS-4000 Series Cli Command Reference page 433

command terminal length 0 disables pagination and, as a result, the output of the show
running-config command is displayed immediately.
Default 24 lines per page
Format
terminal length <0|5-48>
Mode Privileged EXEC
no terminal length
Use this command to set the terminal length to the default value.
show terminal length
Use this command to display the value of the user-configured terminal length size.
Format
show terminal length
Mode Privileged EXEC
nvram size
Use this command to display NVRAM size information.
Format
show nvram-size
Mode Global Config
The output shows the NVRAM size in bytes, the bytes used, and the bytes available.
System Information and Statistics Commands
425