Serviceability Packet Tracing Commands - D-Link DWS-4000 Series Cli Command Reference

D-Link Unified Switch CLI Command Reference
------------------------------ ------------------------------
accounting.gm.com
Host
---------------
www.stanford.edu
S
ERVICEABILITY
These commands improve the capability of network engineers to diagnose conditions affecting their Unified Switch product.
Caution! The output of "debug" commands can be long and may adversely affect system performance.
debug arp
Use this command to enable ARP debug protocol messages.
Default disabled
Format
debug arp
Mode Privileged EXEC
no debug arp
Use this command to disable ARP debug protocol messages.
Format
no debug arp
Mode Privileged EXEC
debug auto-voip
Use this command to enable Auto VOIP debug messages. Use the optional parameters to trace H323, SCCP, or SIP packets
respectively.
Default disabled
Format
debug auto-voip [H323|SCCP|SIP]
Mode Privileged EXEC
no debug auto-voip
Use this command to disable Auto VOIP debug messages.
Format
no debug auto-voip
Mode Privileged EXEC
© 2009 D-Link Corporation. All Rights Reserved
456
176.16.8.8
Total Elapsed
------- -------
72 3
P T
ACKET RACING
Type Addresses
-------- --------------
IP 171.64.14.203
C
OMMANDS