Table of Contents
Advertisement
D-Link Unified Switch CLI Command Reference
no dot1x supplicant timeout held-period
This command sets the held-period value to the default value.
Format
no dot1x supplicant timeout held-period
Mode
Interface Config
dot1x supplicant timeout auth-period
This command configures the authentication period timer interval to wait for the next EAP request challenge from the
authenticator.
Default
30 seconds
Format
dot1x supplicant timeout auth-period <1-65535 seconds>
Mode
Interface Config
no dot1x supplicant timeout auth-period
This command sets the auth-period value to the default value.
Format
no dot1x supplicant timeout auth-period
Mode
Interface Config
dot1x supplicant user
Use this command to map the given user to the port.
Format
dot1x supplicant user
Mode
Interface Config
show dot1x users
This command displays the dot1x supplicant user information for the specified interface.
Format
show dot1x users <slot/port>
Mode
• Privileged EXEC
• User EXEC
Example: The following shows example CLI display output for the command.
(DWS-4026) #show dot1x users 0/6
user name
admin
guest
show dot1x summary
This command displays the dot1x port status.
© 2009 D-Link Corporation. All Rights Reserved
68
Advertisement
Table of Contents
