D-Link DWS-4000 Series Cli Command Reference page 506

D-Link Unified Switch CLI Command Reference
snmp-server community ro
Format
snmp-server community ro <name>
Mode Global Config
This command restricts access to switch information. The access mode is read-only (also called public).
snmp-server community rw
This command restricts access to switch information. The access mode is read/write (also called private).
Format
snmp-server community rw <name>
Mode Global Config
snmp-server enable traps violation
This command enables the sending of new violation traps designating when a packet with a disallowed MAC address is
received on a locked port.
Note: For other port security commands, see
Default disabled
Format
snmp-server enable traps violation
Mode Interface Config
no snmp-server enable traps violation
This command disables the sending of new violation traps.
Format
no snmp-server enable traps violation
Mode Interface Config
snmp-server enable traps
This command enables the Authentication failure trap.
Default enabled
Format
snmp-server enable traps
Mode Global Config
no snmp-server enable traps
This command disables the Authentication failure trap.
Format
no snmp-server enable traps
Mode Global Config
© 2009 D-Link Corporation. All Rights Reserved
498
"Protected Ports Commands" on page 47.