D-Link DWS-4000 Series Cli Command Reference page 209

no country-code
The no version of this command returns the configured country code to the default.
Format
no country-code
Mode Wireless Config
OUI database
This command adds a new entry to the OUI database, if not already present. Each entry consists of an OUI Value, which is
composed of the higher three octets of the Ethernet MAC address of the AP/Client and the organization name for the OUI,
which is a 32-byte string.
Format
oui database <ouival> <oui>
Mode Wireless Config Mode
Parameter Description
ouival OUI Value of the vendor of AP/Client.
oui Organization name for the OUI.
Example: The following example adds an OUI entry with the value and vendor name as shown.
DWS-4026 (Config-wireless)# oui database 00:00:01 "VendorName"
no OUI database
The no version of this command deletes the OUI entry for the specified OUI Value from the local OUI database.
Format
no oui database <ouival>
Mode Wireless Config Mode
peer-group
This command indicates the peer group for this switch. There may be more than one group of peer switches on the same
WLAN. A peer group is created by configuring all peers within the group with the same identifier.
Default 1
Format
peer-group <1-255>
Mode Wireless Config
Parameter Description
1-255 The identifier for the peer switch group. The range is from 1 to 255.
Unified Switch Commands
201