Section 10: Unified Switch Log Messages; Core; Table 12: Bsp Log Messages; Table 13: Nim Log Messages - D-Link DWS-4000 Series Cli Command Reference

Section 10 : Unifie d Switc h Log Me ssa ge s
This section lists common log messages that are provided by Unified Switch , along with information regarding the cause of
each message. There is no specific action that can be taken per message. When there is a problem being diagnosed, a set
of these messages in the event log, along with an understanding of the system configuration and details of the problem) will
assist D-Link in determining the root cause of such a problem.
Note: This section is not a complete list of all syslog messages.
The Log Messages section includes the following subsections:
• "Core" on page 521
• "Utilities" on page 523
• "Management" on page 525
• "Switching" on page 527
• "QoS" on page 532
• "Routing" on page 533
• "Technologies" on page 534
• "Technologies" on page 534
• "O/S Support" on page 536
C
ORE
Component Message
BSP Event(0xaaaaaaaa)
BSP Starting code...
Component Message
NIM NIM: L7_ATTACH out of order for intIfNum(x) unit
x slot x port x
NIM NIM: Failed to find interface at unit x slot x port x for
event(x)
NIM NIM: L7_DETACH out of order for intIfNum(x) unit
x slot x port x
NIM NIM: L7_DELETE out of order for intIfNum(x) unit
x slot x port x

Table 12: BSP Log Messages

Table 13: NIM Log Messages

Unified Switch Log Messages
Cause
Switch has restarted.
BSP initialization complete, starting Unified Switch
application.
Cause
Interface creation out of order.
There is no mapping between the USP and
Interface number.
Interface creation out of order.
Interface creation out of order.
521