D-Link DWS-4000 Series Cli Command Reference page 28

D-Link Unified Switch CLI Command Reference
spanning-tree bpdumigrationcheck
Use this command to force a transmission of rapid spanning tree (RSTP) and multiple spanning tree (MSTP) BPDUs. Use
the <slot/port> parameter to transmit a BPDU from a specified interface, or use the all keyword to transmit BPDUs
from all interfaces. This command forces the BPDU transmission when you execute it, so the command does not change
the system configuration or have a "no" version.
Format
spanning-tree bpdumigrationcheck {<slot/port> | all}
Mode Global Config
spanning-tree configuration name
This command sets the Configuration Identifier Name for use in identifying the configuration that this switch is currently
using. The <name> is a string of up to 32 characters.
Default base MAC address in hexadecimal notation
Format
spanning-tree configuration name <name>
Mode Global Config
no spanning-tree configuration name
This command resets the Configuration Identifier Name to its default.
Format
no spanning-tree configuration name
Mode Global Config
spanning-tree configuration revision
This command sets the Configuration Identifier Revision Level for use in identifying the configuration that this switch is
currently using. The Configuration Identifier Revision Level is a number in the range of 0 to 65535.
Default 0
Format
spanning-tree configuration revision <0-65535>
Mode Global Config
no spanning-tree configuration revision
This command sets the Configuration Identifier Revision Level for use in identifying the configuration that this switch is
currently using to the default value.
Format
no spanning-tree configuration revision
Mode Global Config
© 2009 D-Link Corporation. All Rights Reserved
20