Table of Contents
Advertisement
D-Link Unified Switch CLI Command Reference
C
P
APTIVE
ORTAL
Use the following commands to configure CP user groups.
user group
Use this command to create a user group. The <group-id> variable is a number in the range of 1-10.
Format
user group <group-id>
Mode
Captive Portal Config
no user group
Use this command to delete a user group.
Format
no user group <group-id>
Mode
Captive Portal Config
user group name
Use this command to configure a group name. The <group-id> variable is a number in the range of 1-10. The <name>
variable can be up to 32 alphanumeric characters.
Format
user group <group-id> name <name>
Mode
Captive Portal Config
user group rename
This command replaces a group's associations with the default group or a specified group. The <group-id> and <new-
group-id> variables are each a number in the range of 1-10.
Format
user group <group-id> rename <new-group-id>
Mode
Captive Portal Config
© 2009 D-Link Corporation. All Rights Reserved
374
U
G
C
SER
ROUP
OMMANDS
Advertisement
Table of Contents
