Table of Contents
Advertisement
D-Link Unified Switch CLI Command Reference
port-security max-static
This command sets the maximum number of statically locked MAC addresses allowed on a port.
Default
20
Format
port-security max-static <maxvalue>
Mode
Interface Config
no port-security max-static
This command sets maximum number of statically locked MAC addresses to the default value.
Format
no port-security max-static
Mode
Interface Config
port-security mac-address
This command adds a MAC address to the list of statically locked MAC addresses. The <vid> is the VLAN ID.
Format
port-security mac-address <mac-address> <vid>
Mode
Interface Config
no port-security mac-address
This command removes a MAC address from the list of statically locked MAC addresses.
Format
no port-security mac-address <mac-address> <vid>
Mode
Interface Config
port-security mac-address move
This command converts dynamically locked MAC addresses to statically locked addresses.
Format
port-security mac-address move
Mode
Interface Config
show port-security
This command displays the port-security settings. If you do not use a parameter, the command displays the settings for the
entire system. Use the optional parameters to display the settings on a specific interface or on all interfaces.
Format
show port-security [{<slot/port> | all}]
Mode
Privileged EXEC
Term
Definition
Admin Mode
Port Locking mode for the entire system. This field displays if you do not supply any parameters.
© 2009 D-Link Corporation. All Rights Reserved
130
Advertisement
Table of Contents
