D-Link DWS-4000 Series Cli Command Reference page 221

IP Address
---------------- ------------
1.1.1.1
show wireless discovery vlan-list
This show command displays the configured VLAN ID list for L2 discovery.
Format
show wireless discovery vlan-list
Mode Privileged EXEC
Field Description
VLAN Shows the ID and name of each VLAN in the L2 Discovery list.
Example: The following shows example CLI display output for the command.
(DWS-4026) #show wireless discovery vlan-list
VLAN
----------------
– Default
show wireless status
This show command displays the configured global Unified Switch status parameters. The counters are aggregated for the
peer group if the switch acts as Cluster Controller. If the switch is not a Cluster Controller, the values are for this switch only;
however, the parameters that describe maximum limits are for the peer group.
Format
show wireless status
Mode Privileged EXEC
Field Description
Total Access The total number of access points in the managed AP database. This value is always equal to the sum
Points of Managed Access Points, Connection Failed Access Points, and Discovered Access Points.
Managed Access The total number of APs in the managed AP database that are authenticated, configured, and have an
Points active connection with the Unified Switch.
Connection Failed The number of APs that were previously authenticated and managed, but lost connection with the
Access Points Unified Switch.
Discovered Access APs that have a connection with the switch, but have not yet been completely configured (i.e.,
Points managed APs with a discovered or authenticated status).
Maximum Managed The total number of managed APs that the wireless system (peer group) supports.
APs in Peer Group
Rogue AP Number of APs to which the wireless system is currently sending de-authentication messages to
Mitigation Count mitigate against rogue APs.
Rogue AP Maximum number of APs for which the system can send de-authentication frames.
Mitigation Limit
Total Clients Total number of clients in the database. This total includes clients with an Associated, Authenticated,
or Disassociated status.
Status
Not Polled
Unified Switch Commands
213