Table of Contents
Advertisement
D-Link Unified Switch CLI Command Reference
Example: The following shows example CLI display output for the command.
(DWS-4026) #show diffserv service brief in
DiffServ Admin Mode............................ Enable
Interface
Direction
----------- ----------- ---------- -------------------------------
3/1
In
show policy-map interface
This command displays policy-oriented statistics information for the specified interface and direction. The <slot/port>
parameter specifies a valid interface for the system.
Note: This command is only allowed while the DiffServ administrative mode is enabled.
Format
show policy-map interface <slot/port> [in]
Mode
Privileged EXEC
Term
Definition
Interface
Valid slot and port number separated by a forward slash.
Direction
The traffic direction of this interface service.
Operational Status The current operational status of this DiffServ service interface.
Policy Name
The name of the policy attached to the interface in the indicated direction.
The following information is repeated for each class instance within this policy:
Term
Definition
Class Name
The name of this class instance.
In Discarded
A count of the packets discarded for this class instance for any reason due to DiffServ treatment of the
Packets
traffic class.
Example: The following shows example CLI display output for the command.
(DWS-4026) #show policy-map interface 0/1 in
Interface...................................... 0/1
Direction...................................... In
No in-bound policy is attached to this interface.
show service-policy
This command displays a summary of policy-oriented statistics information for all interfaces in the specified direction.
Format
show service-policy in
Mode
Privileged EXEC
© 2009 D-Link Corporation. All Rights Reserved
396
OperStatus
Down
p1
Policy Name
Advertisement
Table of Contents
