D-Link DWS-4000 Series Cli Command Reference page 362

D-Link Unified Switch CLI Command Reference
no max-bandwidth-up
Default 0
Format
max-bandwidth-up <rate>
Mode Captive Portal Config
Parameter Description
rate Rate in bps. 0 indicates limit not enforced.
This command sets to the default the maximum rate at which a client can send data into the network.
Format
no max-bandwidth-up
Mode Captive Portal Instance
max-bandwidth-down
This command configures the maximum rate at which a client can receive data from the network.
Default 0
Format
max-bandwidth-down <rate>
Mode Captive Portal Instance
Parameter Description
rate Rate in bps. 0 indicates limit not enforced.
no max-bandwidth-down
This command sets to the default the maximum rate at which a client can receive data from the network.
Format
no max-bandwidth-down
Mode Captive Portal Instance
max-input-octets
This command configures the maximum number of octets the user is allowed to transmit. After this limit has been reached
the user will be disconnected. If the value is set to 0 then the limit is not enforced.
Default 0
Format
max-input-octets <bytes>
Mode Captive Portal Instance
Parameter Description
bytes Input octets in bytes. 0 indicates limit not enforced.
© 2009 D-Link Corporation. All Rights Reserved
354