Table of Contents
Advertisement
D-Link Unified Switch CLI Command Reference
Default
0
Format
user <user-id> max-bandwidth-up <bps>
Mode
Captive Portal Config
Parameter
Description
user-id
User ID from 1 to 128 characters.
Client transmit rate in bytes per second (bps). 0 denotes unlimited bandwidth.
bps
no user max-bandwidth-up
Use this command to set to the default the bandwidth at which the client can send data into the network.
Format
no user <user-id> max-bandwidth-up
Mode
Captive Portal Config
user max-bandwidth-down
This command is used configure the bandwidth in bytes per second (bps) at which the client can receive data from the
network. 0 denotes using the default value configured for the captive portal.
Default
0
Format
user <user-id> max-bandwidth-down <bps>
Mode
Captive Portal Config
Parameter
Description
user-id
User ID from 1 to 128 characters.
Client receive rate in bps. 0 denotes unlimited bandwidth.
bps
no user max-bandwidth down
Use this command to set to the default value the bandwidth at which the client can receive data from the network.
Format
no user <user-name> max-bandwidth-down
Mode
Captive Portal Config
user max-input-octets
This command is used to limit the number of octets in bytes that the user is allowed to transmit. After this limit has been
reached, the user will be disconnected. 0 octets denote unlimited transmission.
Default
0
Format
user <user-id> max-input-octets <octets>
Mode
Captive Portal Config
© 2009 D-Link Corporation. All Rights Reserved
370
Advertisement
Table of Contents
