D-Link DWS-4000 Series Cli Command Reference page 478

D-Link Unified Switch CLI Command Reference
Field Description
IP Address The sFlow receiver IP address.
Address Type The sFlow receiver IP address type. For an IPv4 address, the value is 1 and for an IPv6 address, the
value is 2.
Datagram Version The sFlow protocol version to be used while sending samples to sFlow receiver.
Example: The following shows example CLI display output for the command.
(DWS-4026) #show sflow receivers 1
Receiver Index................................. 1
Owner String...................................
Time out....................................... 0
IP Address:.................................... 0.0.0.0
Address Type................................... 1
Port........................................... 6343
Datagram Version............................... 5
Maximum Datagram Size.......................... 1400
show sflow samplers
Use this command to display the sFlow sampling instances created on the switch.
Format
show sflow samplers
Mode Privileged EXEC
Field Description
Sampler Data The sFlowDataSource (slot/port) for this sFlow sampler. This agent will support Physical ports only.
Source
Receiver Index The sFlowReceiver configured for this sFlow sampler.
Packet Sampling The statistical sampling rate for packet sampling from this source.
Rate
Max Header Size The maximum number of bytes that should be copied from a sampled packet to form a flow sample.
© 2009 D-Link Corporation. All Rights Reserved
470