D-Link DWS-4000 Series Cli Command Reference page 436

D-Link Unified Switch CLI Command Reference
logging port
This command sets the local port number of the LOG client for logging messages. The <portid> can be in the range from
1 to 65535.
Default 514
Format
logging port <portid>
Mode Global Config
no logging port
This command resets the local logging port to the default.
Format
no logging port
Mode Global Config
logging syslog
This command enables syslog logging. The <portid> parameter is an integer with a range of 1-65535.
Default disabled
Format
logging syslog [port <portid>]
Mode Global Config
no logging syslog
This command disables syslog logging.
Format
no logging syslog
Mode Global Config
show logging
This command displays logging configuration information.
Format
show logging
Mode Privileged EXEC
Term Definition
Logging Client Port on the collector/relay to which syslog messages are sent.
Local Port
CLI Command Shows whether CLI Command logging is enabled.
Logging
Console Logging Shows whether console logging is enabled.
Console Logging The minimum severity to log to the console log. Messages with an equal or lower numerical severity
Severity Filter are logged.
Buffered Logging Shows whether buffered logging is enabled.
© 2009 D-Link Corporation. All Rights Reserved
428