Captive Portal Status Commands - D-Link DWS-4000 Series Cli Command Reference

C P
APTIVE ORTAL
Use the commands in this section to view information about the status of one or more captive portal instances.
show captive-portal configuration
This command displays the operational status of each captive portal configuration. The <cp-id> variable is the captive
portal ID, which ranges from 1-10.
Format
show captive-portal configuration <cp-id>
Mode Privileged EXEC
Field Description
CP ID Shows the captive portal ID.
CP Name Shows the captive portal name.
Operational Status Shows whether the captive portal is enabled or disabled.
Disable Reason If the captive portal is disabled, this field indicates the reason.
Blocked Status Shows the blocked status, which is Blocked or Not Blocked.
Authenticated Shows the number of authenticated users connected to the network through this captive portal.
Users
Configured Shows the number of locales defined for this captive portal.
Locales
show captive-portal configuration interface
This command displays information for all interfaces assigned to a captive portal configuration or a specific interface
assigned to a captive portal configuration.
Format
show captive-portal configuration <cp-id> interface [interface]
Mode Privileged EXEC
Field Description
CP ID Shows the captive portal ID.
CP Name Shows the captive portal name.
Interface Valid slot and port number separated by a forward slash.
Interface Describes the interface.
Description
Operational Status Shows whether the captive portal is enabled or disabled
Block Status Shows the blocked status, which is Blocked or Not Blocked.
If you include the optional slot/port information, the following additional information appears:
Disable Reason If the captive portal is disabled, this field indicates the reason.
S C
TATUS OMMANDS

Captive Portal Status Commands

359