Icmp Throttling Commands - D-Link DWS-4000 Series Cli Command Reference

Term Definition
Bad Packets The number of RIP response packets received by the RIP process which were subsequently discarded
Received for any reason.
Bad Routes The number of routes contained in valid RIP packets that were ignored for any reason.
Received
Updates Sent The number of triggered RIP updates actually sent on this interface.
ICMP T
HROTTLING
This section describes the commands you use to configure options for the transmission of various types of ICMP messages.
ip unreachables
Use this command to enable the generation of ICMP Destination Unreachable messages. By default, the generation of ICMP
Destination Unreachable messages is enabled.
Default enable
Format
ip unreachables
Mode Interface Config
no ip unreachables
Use this command to prevent the generation of ICMP Destination Unreachable messages.
Format
no ip unreachables
Mode Interface Config
ip redirects
Use this command to enable the generation of ICMP Redirect messages by the router. By default, the generation of ICMP
Redirect messages is enabled.
Default enable
Format
ip redirects
Mode • Global Config
• Interface Config
no ip redirects
Use this command to prevent the generation of ICMP Redirect messages by the router.
Format
no ip redirects
Mode • Global Config
• Interface Config
C
OMMANDS

ICMP Throttling Commands

197