D-Link DWS-4000 Series Cli Command Reference page 219

Field Description
Country Code Shows the country in which the WLAN is operating.
Peer Group ID Shows the Peer group ID.
Cluster Priority Priority of this switch for the Cluster election.
Cluster Controller Indicates whether or not this switch is the Cluster controller.
Cluster Controller The IP address of the switch that acts as the Cluster controller.
IP Address
AP Client Qos Shows whether the AP Client QoS mode is enabled or disabled.
Mode
Example: The following shows example CLI display output for the command.
(DWS-4026) #show wireless
Administrative Mode............................ Enable
WLAN Switch Operational Mode................... Enabled
WS IP Address.................................. 10.0.0.1
AP Authentication Mode......................... Disable
AP Auto Upgrade Mode........................... Disable
AP Validation Method........................... Local
Client Roam Timeout (secs)..................... 30
Country Code................................... US - United States
Peer Group ID.................................. 1
Cluster Priority............................... 2
Cluster Controller............................. Yes
Cluster Controller IP Address.................. 10.0.0.1
AP Client QoS Mode............................. Disable
show wireless country-code
This show command displays the country codes configurable on the Unified Switch.
Format
show wireless country-code
Mode Privileged EXEC
Field Description
Code Shows the 2-letter country code.
Country Shows the name of the country associated with the code.
show wireless OUI database
This show command displays all the OUI entries created by the admin in the local OUI database.
Format
show OUI database [<ouival>]
Mode Privileged EXEC
Unified Switch Commands
211