802.1X Supplicant Commands - D-Link DWS-4000 Series Cli Command Reference

no dot1x supplicant port-control
This command sets the port-control mode to the default, auto.
Default auto
Format
no dot1x supplicant port-control
Mode Interface Config
dot1x supplicant max-start
This command configures the number of attempts that the supplicant makes to find the authenticator before the supplicant
assumes that there is no authenticator.
Default 3
Format
dot1x supplicant max-start <1-10>
Mode Interface Config
no dot1x supplicant max-start
This command sets the max-start value to the default.
Format
no dot1x supplicant max-start
Mode Interface Config
dot1x supplicant timeout start-period
This command configures the start period timer interval to wait for the EAP identity request from the authenticator.
Default 30 seconds
Format
dot1x supplicant timeout start-period <1-65535 seconds>
Mode Interface Config
no dot1x supplicant timeout start-period
This command sets the start-period value to the default.
Format
no dot1x supplicant timeout start-period
Mode Interface Config
dot1x supplicant timeout held-period
This command configures the held period timer interval to wait for the next authentication on previous authentication fail.
Default 30 seconds
Format
dot1x supplicant timeout held-period <1-65535 seconds>
Mode Interface Config

802.1x Supplicant Commands

67