D-Link DWS-4000 Series Cli Command Reference page 216

D-Link Unified Switch CLI Command Reference
Default 1500
Format
tunnel-mtu {1500 | 1520}
Mode Wireless Config
Parameter Description
1500 Maximum IP frame size is 1518 tagged/1522 untagged.
1520 Maximum IP frame size is 1538 tagged/1542 untagged.
no tunnel-mtu
The no version of this command returns the configured network MTU size to the default value.
Format
no tunnel-mtu
Mode Wireless Config
cluster-priority
This command configures the Cluster priority of the switch. This configuration is used to change the preference level of the
switch to select or unselect it as the Cluster Controller. A higher number indicates a higher preference.
Default 0
Format
cluster-priority <0-255>
Mode Wireless Config
Parameter Description
0-255 Preference level for Cluster Controller election.
radius server-name
This command configures global RADIUS authentication /accounting server name for wireless clients. The server name can
contain alphanumeric characters plus –, _, and space.
Default • Default-RADIUS-Server – authentication server name
• Default-RADIUS-Server – accounting server name
Format
radius server-name {auth | acct} <name>
Mode Wireless Config
no radius server-name
The no version of this command sets the global RADIUS authentication /accounting server name to the default value.
Format
no radius server-name {auth | acct}
Mode Wireless Config
© 2009 D-Link Corporation. All Rights Reserved
208