D-Link DWS-4000 Series Cli Command Reference page 419

Term Definition
Interface For a service port the output is Management. For a network port, the output is the slot/port of the
physical interface.
show eventlog
This command displays the event log, which contains error messages from the system. The event log is not cleared on a
system reset.
Format
show eventlog
Mode Privileged EXEC
Term Definition
File The file in which the event originated.
Line The line number of the event.
Task Id The task ID of the event.
Code The event code.
Time The time this event occurred.
Unit The unit for the event.
Note: Event log information is retained across a switch reset.
show hardware
This command displays inventory information for the switch.
Note: The show version command and the show hardware command display the same information. In future
releases of the software, the show hardware command will not be available. For a description of the command
output, see the command
Format
show hardware
Mode Privileged EXEC
show version
This command displays inventory information for the switch.
Note: The show version command will replace the show hardware command in future releases of the
software.
Format
show version
Mode Privileged EXEC
"show version" on page 411.
System Information and Statistics Commands
411