Table 30: Ip Subnet Vlans Log Messages; Table 31: Mac-Based Vlans Log Messages - D-Link DWS-4000 Series Cli Command Reference

D-Link Unified Switch CLI Command Reference
Component Message
Protected Ports unable to set protected port group
Protected Ports Cannot delete intIfNum xxx from group yyy
Protected Ports Cannot update group YYY after deleting interface
XXX
Protected Ports Received an interface change callback while not
ready to receive it
Component Message
IPsubnet vlans ERROR vlanIpSubnetSubnetValid :Invalid subnet This occurs when an invalid pair of subnet and
IPsubnet vlans IP Subnet Vlans: failed to save configuration
IPsubnet vlans vlanIpSubnetCnfgrInitPhase1Process: Unable to
create r/w lock for vlanIpSubnet
IPsubnet vlans vlanIpSubnetCnfgrInitPhase2Process: Unable to
register for VLAN change callback
IPsubnet vlans vlanIpSubnetCnfgrFiniPhase1Process: could not
delete avl semaphore
IPsubnet vlans vlanIpSubnetDtlVlanCreate: Failed
IPsubnet vlans vlanIpSubnetSubnetDeleteApply: Failed
IPsubnet vlans vlanIpSubnetVlanChangeCallback: Failed to add
an Entry
IPsubnet vlans vlanIpSubnetVlanChangeCallback: Failed to
delete an Entry
Component Message
Mac based VLANS MAC VLANs: Failed to save configuration
Mac based VLANS vlanMacCnfgrInitPhase1Process: Unable to
create r/w lock for vlanMac
Mac based VLANS Unable to register for VLAN change callback
Mac based VLANS vlanMacCnfgrFiniPhase1Process: could not
delete avl semaphore
Mac based VLANS vlanMacAddApply: Failed to add an entry
© 2009 D-Link Corporation. All Rights Reserved
528
Table 29: Protected Ports Log Messages (Cont.)

Table 30: IP Subnet VLANS Log Messages

Table 31: MAC-based VLANs Log Messages

Cause
This appears when a dtl call fails to add interface
mask at the driver level.
This appears when a dtl call to delete an interface
from a group fails.
This message appears when an update group for
a interface deletion fails.
This appears when an interface change call back
has come before the protected port component is
ready.
Cause
netmask has come from the CLI.
This message appears when save configuration of
subnet vlans failed.
This appears when a read/write lock creations
fails.
This appears when this component unable to
register for vlan change notifications.
This appears when a semaphore deletion of this
component fails.
This appears when a dtl call fails to add an entry
into the table.
This appears when a dtl fails to delete an entry
from the table.
This appears when a dtl fails to add an entry for a
vlan add notify event.
This appears when a dtl fails to delete an entry for
an vlan delete notify event.
Cause
This message appears when save configuration of
Mac vlans failed.
This appears when a read/write lock creations
fails.
This appears when this component unable to
register for vlan change notifications.
This appears when a semaphore deletion of this
component fails.
This appears when a dtl call fails to add an entry
into the table.