D-Link DWS-4000 Series Cli Command Reference page 70

Hide thumbs Also See for DWS-4000 Series:
Table of Contents

Advertisement

D-Link Unified Switch CLI Command Reference
Format
show authentication users <listname>
Mode
Privileged EXEC
Term
Definition
User
The user assigned to the specified authentication login list.
Component
The component (User or 802.1x) for which the authentication login list is assigned.
show dot1x
This command is used to show a summary of the global dot1x configuration, summary information of the dot1x configuration
for a specified port or all ports, the detailed dot1x configuration for a specified port and the dot1x statistics for a specified port
- depending on the tokens used.
Format
show dot1x [{summary {<slot/port> | all} | detail <slot/port> | statistics
<slot/port>]
Mode
Privileged EXEC
If you do not use the optional parameters <slot/port> or <vlanid>, the command displays the global dot1x mode and
the VLAN Assignment mode.
Term
Definition
Administrative
Indicates whether authentication control on the switch is enabled or disabled.
Mode
VLAN Assignment
Indicates whether assignment of an authorized port to a RADIUS assigned VLAN is allowed (enabled)
Mode
or not (disabled).
If you use the optional parameter summary {<slot/port> | all}, the dot1x configuration for the specified port or all
ports are displayed.
Note: MAC-based dot1x authentication is supported on the BCM56224, BCM56514, BCM56624, and BCM56820
platforms.
Term
Definition
Interface
The interface whose configuration is displayed.
Control Mode
The configured control mode for this port. Possible values are force-unauthorized | force-authorized |
auto | mac-based | authorized | unauthorized.
Operating Control
The control mode under which this port is operating. Possible values are authorized | unauthorized.
Mode
Reauthentication
Indicates whether re-authentication is enabled on this port.
Enabled
Port Status
Indicates whether the port is authorized or unauthorized. Possible values are authorized |
unauthorized.
If you use the optional parameter 'detail <slot/port>', the detailed dot1x configuration for the specified port is
displayed.
© 2009 D-Link Corporation. All Rights Reserved
62

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dwl-8600ap

Table of Contents