Table of Contents
Advertisement
D-Link Unified Switch CLI Command Reference
Parameter
Description
octets
Number of bytes.
no user max-total-octets
Use this command to set to the default the number of octets in bytes that the user is allowed to transmit and receive.
Format
no user <user-id> max-total-octets
Mode
Captive Portal Config
show captive-portal user
This command displays all configured users or a specific user in the captive portal local user database. Enter the optional
user ID to view information about the specified user. The [user-id] variable is a valid user configured in the local
database. Enter the group keyword or the group keyword and group ID variable to view the user information organized by
groups.
Format
show captive-portal user [user-id] [group [<group-id>]]
Mode
Privileged EXEC
Field
Description
User ID
Displays the ID of the user.
User Name
Displays the user name.
Session Timeout
Displays the number of seconds the user can remain in a session before being disconnected from the
Captive Portal.
Idle Timeout
Displays the number of seconds the user can remain idle before being disconnected from the Captive
Portal.
Group ID
Displays the group identifier for the group to which the user belongs.
When you include the [user-id] variable, the following information also displays:
Password
Indicates whether a password has been configured for the user.
Configured
Max Bandwidth Up
The maximum rate in bytes per second (bps) at which a client can send data into the network.
(bps)
Max Bandwidth
The maximum rate in bps at which a client can receive data from the network.
Down (bps)
Max Bandwidth
The maximum number of octets the user is allowed to transmit.
Input Octets
(bytes)
Max Bandwidth
The maximum number of octets the user is allowed to receive.
Output Octets
(bytes)
Max Bandwidth
The maximum number of octets the user is allowed to transfer, i.e., the sum of octets transmitted and
Total Octets
received.
(bytes)
© 2009 D-Link Corporation. All Rights Reserved
372
Advertisement
Table of Contents
