Diffserv Service Commands - D-Link DWS-4000 Series Cli Command Reference

Hide thumbs Also See for DWS-4000 Series:
Table of Contents

Advertisement

D-Link Unified Switch CLI Command Reference
For set-cos-transmit an 802.1p priority value is required and is specified as an integer from 0-7.
Format
police-simple {<1-4294967295> <1-128> conform-action {drop | set-prec-
transmit <0-7> | set-dscp-transmit <0-63> | set-cos-transmit <0-7> |
transmit} [violate-action {drop | set-prec-transmit <0-7> | set-dscp-
transmit <0-63> | set-cos-transmit <0-7> | transmit}]}
Mode
Policy-Class-Map Config
Incompatibilities
Drop, Mark (all forms)
policy-map
This command establishes a new DiffServ policy. The <policyname> parameter is a case-sensitive alphanumeric string
from 1 to 31 characters uniquely identifying the policy. The type of policy is specific to the inbound traffic direction as indicated
by the in parameter.
Note: The CLI mode is changed to Policy-Map Config when this command is successfully executed.
Format
policy-map <policyname> in
Mode
Global Config
no policy-map
This command eliminates an existing DiffServ policy. The <policyname> parameter is the name of an existing DiffServ
policy. This command may be issued at any time. If the policy is currently referenced by one or more interface service
attachments, this delete attempt fails.
Format
no policy-map <policyname>
Mode
Global Config
policy-map rename
This command changes the name of a DiffServ policy. The <policyname> is the name of an existing DiffServ class. The
<newpolicyname> parameter is a case-sensitive alphanumeric string from 1 to 31 characters uniquely identifying the
policy.
Format
policy-map rename <policyname> <newpolicyname>
Mode
Global Config
D
S
S
IFF
ERV
ERVICE
Use the DiffServ service commands to assign a DiffServ traffic conditioning policy, which you specified by using the policy
commands, to an interface in the incoming direction
The service commands attach a defined policy to a directional interface. You can assign only one policy at any one time to
an interface in the inbound direction. DiffServ is not used in the outbound direction.
© 2009 D-Link Corporation. All Rights Reserved
390
C
OMMANDS

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dwl-8600ap

Table of Contents