D-Link DWS-4000 Series Cli Command Reference page 68

D-Link Unified Switch CLI Command Reference
Default • guest-vlan-period: 90 seconds
• reauth-period: 3600 seconds
• quiet-period: 60 seconds
• tx-period: 30 seconds
• supp-timeout: 30 seconds
• server-timeout: 30 seconds
Format
dot1x timeout {{guest-vlan-period <seconds>} |{reauth-period <seconds>} |
{quiet-period <seconds>} | {tx-period <seconds>} | {supp-timeout <seconds>} |
{server-timeout <seconds>}}
Mode Interface Config
no dot1x timeout
This command sets the value, in seconds, of the timer used by the authenticator state machine on this port to the default
values. Depending on the token used, the corresponding default values are set.
Format
no dot1x timeout {guest-vlan-period | reauth-period | quiet-period | tx-period
| supp-timeout | server-timeout}
Mode Interface Config
dot1x unauthenticated-vlan
Use this command to configure the unauthenticated VLAN associated with that port. The unauthenticated VLAN ID can be
a valid VLAN ID from 0-Maximum supported VLAN ID (3965 for Unified Switch Enterprise). The unauthenticated VLAN must
be statically configured in the VLAN database to be operational. By default, the unauthenticated VLAN is 0, i.e. invalid and
not operational.
Default 0
Format
dot1x unauthenticated-vlan <vlan id>
Mode Interface Config
no dot1x unauthenticated-vlan
This command resets the unauthenticated-vlan associated with the port to its default value.
Format
no dot1x unauthenticated-vlan
Mode Interface Config
dot1x user
This command adds the specified user to the list of users with access to the specified port or all ports. The <user> parameter
must be a configured user.
Format
dot1x user <user> {<slot/port> | all}
Mode Global Config
© 2009 D-Link Corporation. All Rights Reserved
60