Table of Contents
Advertisement
macfilter adddest all
This command adds all interfaces to the destination filter set for the MAC filter with the given <macaddr> and VLAN of
<vlanid>. The <macaddr> parameter must be specified as a 6-byte hexadecimal number in the format of
b1:b2:b3:b4:b5:b6. The <vlanid> parameter must identify a valid VLAN.
Note: Configuring a destination port list is only valid for multicast MAC addresses.
Format
macfilter adddest all <macaddr>
Mode
Global Config
no macfilter adddest all
This command removes all ports from the destination filter set for the MAC filter with the given <macaddr> and VLAN of
<vlanid>. The <macaddr> parameter must be specified as a 6-byte hexadecimal number in the format of
b1:b2:b3:b4:b5:b6. The <vlanid> parameter must identify a valid VLAN.
Format
no macfilter adddest all <macaddr>
Mode
Global Config
macfilter addsrc
This command adds the interface to the source filter set for the MAC filter with the MAC address of <macaddr> and VLAN
of <vlanid>. The <macaddr> parameter must be specified as a 6-byte hexadecimal number in the format of
b1:b2:b3:b4:b5:b6. The <vlanid> parameter must identify a valid VLAN.
Format
macfilter addsrc <macaddr> <vlanid>
Mode
Interface Config
no macfilter addsrc
This command removes a port from the source filter set for the MAC filter with the MAC address of <macaddr> and VLAN
of <vlanid>.
The <macaddr> parameter must be specified as a 6-byte hexadecimal number in the format of
b1:b2:b3:b4:b5:b6. The <vlanid> parameter must identify a valid VLAN.
Format
no macfilter addsrc <macaddr> <vlanid>
Mode
Interface Config
macfilter addsrc all
This command adds all interfaces to the source filter set for the MAC filter with the MAC address of <macaddr> and
<vlanid>. You must specify the <macaddr> parameter as a 6-byte hexadecimal number in the format of
b1:b2:b3:b4:b5:b6. The <vlanid> parameter must identify a valid VLAN.
Format
macfilter addsrc all <macaddr> <vlanid>
Mode
Global Config
Static MAC Filtering
97
Advertisement
Table of Contents
