D-Link DWS-4000 Series Cli Command Reference page 462

D-Link Unified Switch CLI Command Reference
ip host
Use this command to define static host name-to-address mapping in the host cache. <name> is host name. <ip address>
is the IP address of the host.
Default none
Format
ip host <name> <ipaddress>
Mode Global Config
no ip host
Use this command to remove the name-to-address mapping.
Format
no ip host <name>
Mode Global Config
ip domain retry
Use this command to specify the number of times to retry sending Domain Name System (DNS) queries. The parameter
<number> indicates the number of times to retry sending a DNS query to the DNS server. This number ranges from 0 to 100.
Default 2
Format
ip domain retry <number>
Mode Global Config
no ip domain retry
Use this command to return to the default.
Format
no ip domain retry <number>
Mode Global Config
ip domain timeout
Use this command to specify the amount of time to wait for a response to a DNS query. The parameter <seconds> specifies
the time, in seconds, to wait for a response to a DNS query. <seconds> ranges from 0 to 3600.
Default 3
Format
ip domain timeout <seconds>
Mode Global Config
no ip domain timeout
Use this command to return to the default setting.
Format
no ip domain timeout <seconds>
Mode Global Config
© 2009 D-Link Corporation. All Rights Reserved
454