D-Link DWS-4000 Series Cli Command Reference page 47

Hide thumbs Also See for DWS-4000 Series:
Table of Contents

Advertisement

vlan pvid
This command changes the VLAN ID per interface.
Default
1
Format
vlan pvid <1-3965>
Mode
Interface Config
no vlan pvid
This command sets the VLAN ID per interface to 1.
Format
no vlan pvid
Mode
Interface Config
vlan tagging
This command configures the tagging behavior for a specific interface in a VLAN to enabled. If tagging is enabled, traffic is
transmitted as tagged frames. If tagging is disabled, traffic is transmitted as untagged frames. The ID is a valid VLAN
identification number.
Format
vlan tagging <1-3965>
Mode
Interface Config
no vlan tagging
This command configures the tagging behavior for a specific interface in a VLAN to disabled. If tagging is disabled, traffic is
transmitted as untagged frames. The ID is a valid VLAN identification number.
Format
no vlan tagging <1-3965>
Mode
Interface Config
vlan association subnet
This command associates a VLAN to a specific IP-subnet.
Format
vlan association subnet <ipaddr> <netmask> <vlanid>
Mode
VLAN Config
no vlan association subnet
This command removes association of a specific IP-subnet to a VLAN.
Format
no vlan association subnet <ipaddr> <netmask>
Mode
VLAN Config
VLAN Commands
39

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dwl-8600ap

Table of Contents