Monitoring Associated Client Information; Table 40. Access Point Rf Scan Status; Figure 63. Associated Client Status - D-Link Unified Access System DWS-3000 Series User Manual

D-Link Unified Access System User Manual

Table 40. Access Point RF Scan Status

Field
MAC Address
SSID
Physical Mode
Channel
Status
Transmit Rate
Beacon Interval
Discovered Age
Age

Monitoring Associated Client Information

You can view a variety of information about the wireless clients that are associated with the
APs the switch manages. To access the associated client information, click Monitoring >
Client > Associated Clients.

Figure 63. Associated Client Status

The following tabs are available:
138 © 2001- 2006 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
Description
The Ethernet MAC address of the detected AP, this could be a physical radio
interface or VAP MAC. For D-Link Access Points this is always a VAP
MAC address.
Service Set ID of the network, this is broadcast in detected beacon frame.
Indicates the 802.11 mode being used on the AP.
Transmit channel of the AP.
Indicates the managed status of the AP, whether this is a valid AP known to
the switch or a Rogue on the network. The valid values are:
• WS Managed - The neighbor AP is managed by this switch, the
neighbor AP status can be referenced using its base MAC address.
• Peer WS Managed - The neighbor AP is managed by another switch
within the peer group.
• Acknowledged Rogue - The AP is configured as a valid AP entry (local
or RADIUS), it has been acknowledged and is not reported as Rogue.
• Ad Hoc Rogue - The AP neighbor was detected participating in an ad
hoc network.
Indicates the rate at which the AP is currently transmitting data.
Beacon interval for the neighbor AP network.
Time in seconds since this AP was first detected in an RF scan.
Time in seconds since this AP was last detected in an RF scan.