Logging Commands - D-Link DWS-4000 Series Cli Command Reference

D-Link Unified Switch CLI Command Reference
L C
OGGING OMMANDS
This section describes the commands you use to configure system logging, and to view logs and the logging settings.
logging buffered
This command enables logging to an in-memory log that keeps up to 128 logs.
Default disabled; critical when enabled
Format
logging buffered
Mode Global Config
no logging buffered
This command disables logging to in-memory log.
Format
no logging buffered
Mode Global Config
logging buffered wrap
This command enables wrapping of in-memory logging when the log file reaches full capacity. Otherwise when the log file
reaches full capacity, logging stops.
Default enabled
Format
logging buffered wrap
Mode Privileged EXEC
no logging buffered wrap
This command disables wrapping of in-memory logging and configures logging to stop when the log file capacity is full.
Format
no logging buffered wrap
Mode Privileged EXEC
logging cli-command
This command enables the CLI command logging feature, which enables the Unified Switch software to log all CLI
commands issued on the system.
Default enabled
Format
logging cli-command
Mode Global Config
© 2009 D-Link Corporation. All Rights Reserved
426